You are here : Home | Products & Systems | Pure Water Exchange Systems | Conductivity Controller
Conductivity Controller
Conductivity Controller – C3645
The model C3645 Conductivity indicator controller has been designed for DIN rail mounting, either on the back plate of a control panel or in an optional surface mounting weatherproof enclosure.
The surface mounting weatherproof enclosure is rated to IP55 for all year round outside use and is fitted with an external makalon door. Providing access to the calibration and set point controls for easy on site adjustment.
The model C3645 is fitted with one control relay and an adjustable time delay of up to 40 seconds before the relay operates.
Fitted with automatic temperature compensation over the range of 0 – 100o C via a 10KΩ NTC sensor. Industry standard 4 – 20 mA current output to operate remote indicators, controllers and chart recorders.
The 3000 series of instruments provide a cost effective method of control for many industrial processes which include, power generation, water treatment plant, boiler and cooling waters, and solution strength control.
| Technical Specifications | |
|---|---|
| Input | Any AWE. conductivity cell K = 0.01, 0.1, 1.0 or 10 |
| Range | With K =1.0 cell 0 - 2000 μS and 0 - 200 μS to 0 - 20 mS |
| Display | 3 1/2 L.C.D. units |
| Display size | 12.5 mm |
| Output | 4 - 20 ma into 500 Ω |
| Set points | on/off over 100% of range 2 amp non inductive |
| Time delay | 0 - 40 seconds adjustable |
| Temp comp | Automatic via 10KΩ NTC. sensor |
| Temp coefficient | Fixed at 2%/oC |
| Zero | ± 15% |
| Slope | ± 20% |
| Mains supply | 230/115 volt 50/ 60 Hz |
| Weight | 265 grams DIN rail version |
