big bubba HIGH FLOW FILTER HOUSINGS

big bubba high flow housings

Big Bubba High Flow Cartridge Filter Housing

Big-Bubba filter housings are made of rugged, glass-reinforced polypropylene so they will not chip, rust or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications.

Big-Bubba filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today’s high cost of stainless steel!

Big-Bubba filters are ideal for a wide range of applications, including:

Commercial filtration, Industrial filtration, Pre-filtration for reverse osmosis equipment, Community water systems, Sea water applications due to their non-corrosive construction, Replacement for bag filters for more filter area, Replacement for multiple cartridge filters for greater convenience, Water for livestock & poultry, Whole house filtration.

Proprietary cartridges

We offer a full line of replacement cartridges for Big-Bubba filters, all with double o-ring seals for superior performance. Cartridges are easy to install, easy to service and easy replace. Some of the filter media we use in select micron ratings are cleanable and reusable to reduce filtration costs.

Big Bubba Cartridge Filter
Quick View

Big Bubba Filter Housing

£615.00 - £738.00 (inc. VAT)

Big Bubba Features

E-Z change-out

Cartridge replacement is easy as 1-2-3:
1. Remove swing bolts.
2. Remove lid.
3. Rotate cartridge 1/4 turn and pull-up.

Two outlets

Big-Bubba filters have two outlets on opposite sides to allow more flexibility with piping configurations. Filter may be installed in-line or piping may come from the same direction. A plug is provided for the outlet, not used.

Specifications

  • Pipe fittings : 2” slip
  • Overall height : 40”
  • Width (vessel OD) : 12”
  • Maximum flow rate : 150 GPM* (36 M3/hr)
  • Maximum flow (carbon) : 15 GPM
  • Maximum flow (1 Absolute) : 50 GPM
  • Maximum temperature : 175°F (80°C) @ 80 psi
  • Maximum working pressure : 125 psi (8.75 bar)
  • Burst test : 300 psi
  • Cycle test : 100,000

Need Help?

We can advise on the correct sizing for your water filter housing.
Please contact us on
01629 363311

we are more than happy to help.