PLASTIC VARIABLE FLOW METERS

HOME | FLOW METERS | PLASTIC VARIABLE

Max Flow Rate : 100 L/min. Operating Temperature : 55.00 ºC. Operating Pressure : 6 BarG. Materials : Polycarbonate flowtube. Stainless steel connections. Neoprene/Buna N 0 rings. Installation : Tube must be vertical with flow upwards. Read centre line of float against scale. Panel Cut Out : 116 x 19mm mounting brackets supplied with meter. Connections : 1/8″ NPT Female. Available for Gas, Air & Water

Plastic Variable Flow Meters – GR Series

Plastic moulded VA flowmeter with 50mm scale and rear facing connections. Suitable for flush panel or surface mounting, with or without flow control valve, for air or water ranges.

Max Flow Rate : 100 L/min. Operating Temperature : 80.00 ºC. Operating Pressure : 10 BarG. Tube : TPX plastic. Scale : Black, moulded onto plastic tube. Float : Duraluminium. Housing : White polyester coated mild steel. O-ring Seals : Nitrile with Brass, Viton with Stainless steel. Accuracy : ± 5% FSD (Air and Water calibrations). Dimensions : 1/2″: 219 x 48 x 48 1″: 250 x 67 x 67

Installation : Install tube vertically with flow upwards and read top edge of float

Connections : 1/2″ & 1″ BSP female plated Brass or Stainless steel

Available for Air, Gas & Water

Plastic Variable Flow Meters – PG Series

Variable area flowmeters for higher flow rates in 1/2″ and 1″ pipes, using plastic TPX tubes and Stainless steel or Dural floats. Light open construction with good float visibility.

Max Flow Rate : 10-440 L/min. Operating Temperature : 80.00 ºC. Operating Pressure : 10 BarG. Tube : TPX plastic, borosilicate glass available as option. Scale : Black, moulded onto plastic tube. Float : Duraluminium. Housing : Polyester coated die cast aluminium with perspex window. O-ring Seals : Nitrile with Brass, Viton with Stainless steel. Accuracy : ± 5% FSD (Air and Water calibrations). Dimensions : 250 x 95 x 86mm depth. Installation : In vertical pipeline with flow upwards. Read top edge of float against scale. Connections : 1/2″ & 1″ BSP female plated Brass or Stainless steel. Optional flanged fittings. Exhaust Vent : Platon rear facing blowout vent

Plastic Variable Flow Meters – PG Safety Series

Plastic tube flowmeters in rugged safety housings suitable for unsupported installation in process pipework. Perspex cover retains easy readability but protects operator.

Flow Rate : 12-25000 L/min. Temperature : <75ºC. Operating Pressure : 10 BarG at 20°C. Wetted Materials : Polyamide tube, PVC connectors, EPDM ‘O’ rings & PVDF internals. Installation : Tube must be vertical with flow upwards. Read centre line of float against scale. Panel Cut Out : 116 x 19mm mounting brackets supplied with meter. Connections : Solvent weld or BSP female threads, 1, 1 1/4″, 1 1/2″, 2 and 2 1/2″. Tube Length : 350mm. Overall Length : 400, 408, 418, 432 or 444mm (dependant on pipe size). Accuracy : ±2.5% of full scale. Alarm Operation : Close on rising flow. Alarm Contacts : 240V/5A max (2m PVC lead). Protection : IP 65. Transmitter Output : 4 to 20mA (Active). Transmitter Range : 10 to 100%. Transmitter Loop Resistance : 1kW max. Transmitter Resolution : 0.1%. Transmitter Power Supply : 24V DC, 50mA. Transmitter Electrical connection : 6-way DIN45322 plug

Plastic Variable Flow Meters – DFM VA Series

All plastic construction variable area flowmeters providing excellent chemical resistance and readability, supplied complete with end connections, either for solvent welding to PVC pipe or threaded. Up to three bi-stable alarms can be fitted to each unit or if required, a 4 to 20mA transmitter is available.