You are here : Home | Products & Systems | Water Softeners | Duplex | Clack Duplex | WS2 | Technical Data
Water Softeners – Clack Duplex WS2 Technical Data
 | 2” Top mount control valve suited for commercial/industrial applications |
| Lead free brass construction |
| Economical stainless steel optional meter assembly |
| Service flow rate of 435 lpm (26.1 m3/h) (115 gpm), backwash 303 lpm (18.2 m3/h) (80 gpm) |
| Solid state microprocessor with easy access front panel settings |
| Front panel display for time of day, days until next regeneration, volume remaining and current flow rate. |
| Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential |
| Program in ppm, French degrees, German degrees, or cubic meters |
| Fully programmable regeneration cycle sequence (maximum 9) |
| Programmable regeneration cycle times |
| Days override feature; 1-28 days available |
| Coin Cell Lithium battery back-up with an 24 hour carry over |
| 12-volt output AC Adapter provides safe and easy installation |
| Pre or Post treated water regenerant refill |
| 24 Hour Clock |
| Reliable and proven DC drive |
| Inlet/Outlet (1) | 2” Female BSPT or NPT |
| Cycles | up to 9 |
| Valve Material | Lead free brass |
| Regeneration | Downflow |
| FLOW RATES | |
| Service @ 1 bar/15 psi drop | 435 lpm (26.1 m3/h) (115 gpm) |
| Backwash @ 1.7 bar/25 psi drop | 303 lpm (18.2 m3/h) (80 gpm) |
| Cv Service | 29.7 |
| Cv Backwash | 16.0 |
| OPERATING PRESSURES | |
| Minimum/Maximum | 1.4 - 8.6 bar (20 psi - 125 psi) |
| METER SPECIFICATIONS | |
| Accuracy | ± 5% |
| Flow Rate Range | 5.7 - 568 lpm (1.5 - 150 gpm) |
| Volume Range | 0.02 - 5,700 m3 |
| Totalizer | 1 - 99,999 m3 (264 - 26,417,000 gallons) |
| DIMENSIONS & WEIGHT | |
| Distributor Pilot | |
| Valve bodies with 2" Female BSPT Inlet & Outlet | 50mm OD |
| Valve bodies with 2" Female NPT Inlet & Outlet | 1.90” OD (1.5" NPS) |
| Drain Line Connection | 1.5” Female NPT |
| Brine Line Adapters Included | 1” Male NPT elbow, ¾” x 1” solvent weld elbow and 1/2" OD Poly Tube Compression |
| Mounting Base | 4” - 8 UN |
| Height From Top Of Tank | 216 mm (8.5”) |
| Shipping Weight With Meter | 13 Kg (29 lbs.) |
| ELECTRICAL SPECIFICATIONS | |
| Supply Voltage | 230V AC |
| Supply Frequency | 50 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
| TANK APPLICATIONS | |
| Water Softener | 12” - 48” diameter |
| Water Filter (2) | 12” - 36” diameter |
| CYCLES OF OPERATION | |
| Choose up to nine regeneration cycles, in any order, with a wide range of available values: | |
| Cycle | Range of values |
| Backwash | 1 - 120 minutes |
| Rinse | 1 - 120 minutes |
| Pause (service) | 1 - 480 minutes |
| Brine (co-current) | 1 - 180 minutes |
| Refill (softener) | 0.1 - 99.0 minutes |
| Refill (filter) | 0.1 - 99.0 minutes |