HOME | CONTROLLERS | CONDUCTIVITY CONTROLLERS
CONDUCTIVITY CONTROLLER CC3020
The unit type CC3020 is a controller for full automatic monitoring of the conductivity and eventually starting a regeneration through an external device. The controller is equipped with an conductivity meter without temperature meter. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
£274.63 – £307.05
CC3020 TECHNICAL DATA
- User operated programming using double row of illuminated LCD display.
- Display text in English, French, German or Dutch.
- Adaption to user specific requirements by means of options programmable on site
- 4 stages : Monitoring, Pre Flush, Regeneration wait, Regeneration, Flush, Flush alarm
- Extensive status report facility using information button.
- 1 inputs : regeneration busy
- 2 powered relay outputs : Flush valve (fused 8A), Alarm (fused 8A).
- 1 relay output (dry contact): Regeneration start.
- Secure from power failure as all data is stored long-term without battery.
- Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
- Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter
- Available for wall-mounting.
- Available (input /output) : 12VDC/12VDC, 24VDC/24VDC, 24VAC/24VAC, 115VAC/115VAC, 230VAC/230VAC
