HOME | WATER TESTING EQUIPMENT | WATER HARDNESS MONITORS | TESTOMAT SPARES
Testomat 808
| Part No | Number | Description |
| S10-35767 | 1 | Measuring chamber |
| S10-40176 | 2 | Sight-glass window holder |
| S10-40050 | 3 | Magnetic stirrer |
| S10-37534 | 4 | Measuring chamber cover |
| S10-37536 | 5 | Dosing needle |
| S10-33253 | 6 | Screw M3x40 |
| S10-33246 | 7 | Screw M3x12 |
| S10-33777 | 8 | Flat seal 24x2 |
| S10-40170 | 9 | Sight-glass window 30x3 |
| S10-37538 | 10 | Hose adapter |
| S10-40157 | 11 | Angled plug in connector |
| S10-33797 | 12 | O-ring 3.8 x 1.78 |
| S10-11264 | 13 | O-ring 4.5 x 1.5 |
| S10-11245 | 14 | O-ring 1.78 x 1.78 |
TESTOMAT ECO & 2000
£149.99 - £179.99 (inc. VAT)
| Pressure controller | |
| Part No | Description |
| S10-40125 | Controller / Filter receiver, complete |
| S10-40120 | Controller / Filter receiver |
| S10-40129 | Controller plug T2000, complete |
| S10-11225 | Flow controller valve body |
| S10-11230 | Retaining pin 3x38 |
| S10-11217 | Inlet filter |
| S10-11218 | Spring for inlet filter |
| S10-40121 | Inlet connector |
| S10-40153 | Screw-in connector G 1/4" -6 |
| Measuring chamber | |
| Part No | Description |
| S10-40173 | Sight-glass window with seal |
| S10-40170 | Sight-glass window 30x3 |
| S10-40176 | Sight-glass holder |
| S10-33253 | Bolt M3x40 |
| S10-40032 | Latch fastener TL-17-201-52 |
| S10-11203 | Plastic plug |
| S10-40022 | Measuring chamber T2000 complete |
| Measuring chamber holder | |
| Part No | Description |
| S10-40029 | Measuring chamber holder, complete (without valves) |
| S10-40050 | Magnetic stirrer |
| S10-40186 | Screw-in connector 3/8" -10 |
| S10-40018 | Solenoid valve, 2/2-way |
| S10-40181 | Rear guide bar for measuring chamber 5x60 |
| Dosing pump DOSIClip® | |
| Part No | Description |
| S10-40171 | Pump block, upper part |
| S10-40172 | Pump block, lower part |
| S10-40201 | Jet pump (replacement) |
| S10-40001 | Jet pump SP |
| S10-40011 | Hose, suction, complete |
| S10-40016 | Hose, pressure, complete |
| S10-37232 | Base circuit board TI |
| S10-34668 | Solenoid 24 VDC |
| S10-32046 | Plastic cover CNH 45 N |
| Bottle connection/Suction device | |
| Part No | Description |
| S10-40131 | Screw cap with bottle insert T2000 |
| S10-40130 | Screw cap GL32 - hole |
| S10-40135 | Bottle insert for screw cap with push-fit suction tube |
| Instrument spare parts | |
| Part No | Description |
| S10-31582 | Fuse M4A |
| S10-37266 | Base circuit board T2000 complete 230 V |
| S10-40092 | Control circuit board T2000 complete |
| S10-40091 | Plug-in circuit board driver/receiver SE-T2000 (6) |
| S10-40190 | Cable gland 5-7 |
| S10-40191 | Cable gland 7-10 |
| S10-31713 | Ribbon cable 10 pole with EMI filter clamp |
| S10-40096 | Ribbon cable 26 pole with EMI filter clamp |
| S10-40060 | Cable loom 2V complete (for valves) |
| S10-40062 | Cable loom 2P complete (for max. 2 dosing pumps) |
| S10-40200 | Cable loom complete with mains switch and cap |
| S10-31596 | Fuse T0.08A |
| S10-31585 | Fuse T0.315A |
| S10-31595 | Fuse T0.1A |
| S10-31622 | Fuse T0.16A |
| S10-31592 | Fuse T1.0A |
| Spare parts required after 2 - 3 years of operation | |
| Part No | Description |
| S10-40173 | Sight-glass window with seal |
| S10-11217 | Inlet filter |
| S10-40124 | Gasket set T2000 (according to maintenance requirements) |
| S10-31585 | Fuse T0.315A |
| S10-31592 | Fuse T1.0A |
