HOME | CONTROLLERS | ULTRAFILTRATION CONTROLLERS
ULTRAFILTRATION CONTROLLER UF3020
The unit type UF3020 is universal applicable for automatic monitoring and control of ultra filtration plants. There are six possible stages : “Stand by”, “Filtration”, “Pre flush”, “Flush 1”, “Backwash” and “Flush 2”. This unit can monitor several inputs: high switch for clean water tank, low level switch for raw water tank and an overpressure switch. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
£228.86 – £255.88
UF3020 TECHNICAL DATA
- User operated programming using double row of illuminated LCD display.
- Display text in English, French, German or Dutch.
- Adaption to user specific requirements by means of options programmable on site
- 6 programmable stages (“Stand by”, “Filtration”, “Pre flush”, “Flush 1”, “Backwash” and “Flush 2”) with programmable times and activation of relay outputs
- Extensive status report facility using information button.
- 3 digital inputs : high level clean water tank, low level raw water tank and overpressure
- 3 relay outputs: free programmable for each stage
- Secure from power failure as all data is stored long-term without battery.
- Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
- Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter
- Available for wall-mounting.
- Available (input /output) : 12VDC/12VDC, 24VDC/24VDC, 24VAC/24VAC, 115VAC/115VAC, 230VAC/230VAC
ULTRAFILTRATION CONTROLLER UF2050
The unit type UF2050 is universal applicable for automatic monitoring and control of ultra filtration plants. There are eleven possible stages : “Stand by”, “Filtration”, “Filtration 2”, “Pre flush”, “Air scour”, “Flush 1”, “Backwash”, “Enhanced Backwash 1”, “Enhanced backwash 2”, “Enhanced backwash 3” and “Flush 2”. There is a “top/bottom“ mode available for filtration and backwash step. This unit can monitor several inputs: high and low level switch for clean water tank, low level switch for raw water tank / differential pressure switch, filtration start/stop switch and an overpressure switch. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
£502.43 – £587.48
UF2050 TECHNICAL DATA
- User operated programming using double row of illuminated LCD display.
- Display text in English, French, German or Dutch.
- Adaption to user specific requirements by means of options programmable on site
- Programming a service telephone number possible.
- Large green LCD-display showing remaining time for the current stage
- 11 programmable stages (“Stand by”, “Filtration”, “Filtration 2”, “Pre flush”, “Air scour”, “Flush 1”, “Backwash”, “Enhanced Backwash 1”, “Enhanced backwash 2”, “Enhanced backwash 3” and “Flush 2”) with programmable times and activation of relay outputs
- Top/bottom mode for filtration and backwash
- Extensive status report facility using information button.
- 4 digital inputs : high level clean water tank, low level clean water tank, low level raw water tank, filtration start and overpressure
- 11 relay outputs : 1 potential free output programmable for stages or alarm output and all others free programmable for each stage
- Secure from power failure as all data is stored long-term without battery.
- Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
- Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter
- Available for wall-mounting (UF2050) and panel mounting (UF2051).
- Available (input /output) : 24VAC/24VAC, 115VAC/115VAC, 230VAC/230VAC, 115VAC/24VAC, 230VAC/24 VAC and 240VAC/24VAC
ULTRAFILTRATION CONTROLLER UFS8000
The unit type UFS8000 is universal applicable for automatic monitoring and control of ultra filtration plants. There are nine possible stages : “Stand by”, “Filtration”, “Pre flush”, “Backwash 1”, “Backwash 2”, “CEB 1”, “CEB 2”, “CEB 3” and “Integrity test”. This unit can monitor measurements (all through 0-20mA inputs) like flow, pressure, turbidity, temperature and tank level and several switches e.g. level switches, exceeded pressure switch, start backwash, end position switch for valves, etc.. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
UFS8000 TECHNICAL DATA
- Choice of languages (English, French, German, Dutch and Russian).
- Graphic TFT display (800×480, touch panel) with easy to use menu
- Adaptable to user specific requirements by built-in programmable options.
- Universally applicable for various sizes of installation.
- Treated water production controllable by hand or level switches.
- Programming a service telephone number possible.
- Substantial status information: actual input and output conditions, service telephone number, alarm history, software version
- Security of program information against supply failure.
- 8x Outputs (powered) programmable for output function e.g. inlet valve, feed pump, backwash pump, concentrate valve, permeate valve, dosing pumps.
- 6x Outputs (potential free) programmable for output function e.g. inlet valve, feed pump, backwash pump, concentrate valve, permeate valve, dosing pumps.
- 8x inputs (digital contacts) (optional up to 24) : stop, high level switch, low level switch, valve position switch, pump protection switch, exceeded pressure switch, external alarm reset switch, start backwash, start filtration, level switch dosing tank.
- Option : up to 6 Recorder outputs 0(4)-20mA for recording measurements
- Option : up to 12 Inputs 0(4)-20mA for flow meters, pressure meters, conductivity meters and tank level measurement
- SD Card functions for software updates, data log and loading and saving of configuration.
- Option : RS232 and RS485 communication for log data
- Option : Ethernet communication for web server, e-mail function and remote control
- Enclosure suitable for wall mounting, panel mounting and plate mounting
- Available supply voltage (input/output) : 24-240V, 115/24V, 230/24V and 240/24V.
